W.Nr.2.4610、NiMo16Cr16Ti

Overview of W.Nr.2.4610 corrosion-resistant alloy:

NS335 is an austenitic low-carbon nickel-molybdenum-chromium alloy. The main differences between Nicrofer 6616 hMo and other early-developed alloys with similar chemical composition are low carbon, silicon, iron, and tungsten content. Such a chemical composition makes it exhibit excellent stability at 650-1040 ° C and improves the ability to resist intergranular corrosion. Under appropriate manufacturing conditions, it can avoid blade line corrosion sensitivity and weld heat affected zone corrosion.

 

The characteristics of W.Nr.2.4610 corrosion resistant alloy are:

● Excellent corrosion resistance to most corrosive media, especially in the reduced state.

● Excellent resistance to local corrosion in halides.

 

Chemical composition of W.Nr.2.4610 corrosion-resistant alloy:

%	C	Mn	P	S	Si	Cr	Mo	Ni	W
Min.						14.5	15.0	margin	3.0
Max.	0.08	1.00	0.040	0.030	1.0	16.5	17.0		4.5

 

W.Nr.2.4610 corrosion resistance alloy physical properties:

Density	9.24g/cm3
Melting point	1330-1380℃

 

W.Nr.2.4610 corrosion-resistant alloy

It has been widely used in most chemical industry and high temperature environment.

Typical application areas:

● Flue gas desulfurization system

● Pickling and acid recycling plant

● Production of acetic acid and agricultural chemicals

● Production of titanium dioxide (chlorine method)

● Electrolytic plating