Y1Cr18Ni9Se、12X18H10E

Characteristics and scope of application:

Y1Cr18Ni9Se austenitic free-cutting stainless steel is based on 1Cr18Ni9 steel by adding more than 0.15% of selenium and increasing a certain amount of phosphorus and sulfur, thereby improving the cutting performance of the steel, improving machinability and ablation resistance. Y1Cr18Ni9Se stainless steel is most suitable for automatic lathes. Rivets, screws.

 

chemical composition:

Grade	C≤	Si≤	Mn≤	S≤	P≤	Cr	Ni	Se≥
Y1Cr18Ni9Se	0.15	1.00	2.00	0.060	0.200	1700  19.00	8.00  10.00	0.15

 

Mechanical properties:

Tensile strength σb (MPa): ≥520

Conditional yield strength σ0.2 (MPa): ≥206

Elongation δ5 (%): ≥40

Section shrinkage rate ψ (%): ≥50

Hardness: HB≤187; HRB≤90; HV≤200

 

Heat treatment specifications and metallographic structure:

Heat treatment specifications: solid solution 1010 ~ 1150 ℃ rapid cooling.

Metallographic structure: the organization is characterized by austenite type.

 

delivery status:

Generally, it is delivered in a heat-treated state, and the type of heat treatment is specified in the contract; if it is not specified, it is delivered in a non-heat-treated state.